Skip to main content

Soda Blasting Paint Removal

Soda blasting is a method that can be used to remove paint and coatings from most surfaces. It is safe to use on thin metals and other materials like glass and wood because it is non-abrasive. Soda blasting uses water-soluble sodium bicarbonate to remove paint from surfaces. This technique does not damage the surface below the paint. It’s a versatile process that can be used to remove paint from many types of surfaces, including concrete, fiberglass, and other specialized materials.

The soda blasting method is a great way to remove antifouling bottom paint from boats, and its process can be used on both large and small boats. The soda blaster can be used to take the paint off without damaging the gel coat or fiberglass underneath.

This will prevent water from getting in and causing damage like delamination and blistering in the future. The most common approach to removing paint from a marine application is by using soda blasting.

More Benefits of Soda Blasting

There are several other advantages to using a soda blast. It will not warp metal surfaces, generate heat, or alter the structure of substrates, among other things. Soda blasting is a kind of sandblasting that employs baking soda instead of sand or other abrasives like slag. The substrate is blasted with baking soda, which causes it to erupt into tiny particles, removing rust and surface impurities.

The procedure of soda blasting is quite simple. It does not need any specific cleaning and may be used on a variety of surfaces, including yachts and boats.

It is Cheaper and Consumes Less Time

Soda blasting is a great way to clean the bottom and hull of a boat. Boatyard owners and independent contractors both benefit from this process. Soda blasting is a faster, more effective, less expensive, and environmentally friendly option for yards.

The procedure of soda blasting is quick, only taking a few hours to complete. The whole process can be completed in a day or less, depending on the size of the boat.

Best Solution for Treating Boat Blisters

It’s easy to detect blisters on an unpainted hull any time, any day. However, when the bottom is coated with many coats of paint and marine life, you must employ a less time-consuming, more effective technique.

Soda blasting boats is especially effective for eliminating old antifouling and blistering coats, as well as clingy marine life. It works without causing harm to non-blistered, bare gel coats, and then properly preps the surface for repair. This may all be done in one go.

It Prevents Rust

If you clean a ferrous metal surface using abrasive techniques, such as sandblasting, you will need to coat it with a protective material right away to prevent it from rusting.

Because soda blasting is non-abrasive, it does not create pocks in the metal. The surface is able to be coated several days after cleaning is done. Also, a powdery layer of sodium bicarbonate is known to effectively prevent flash rusting when it is spread over treated metallic surfaces.

Contact Masters Marine

A professional approach is required to get the most out of the soda blasting method for paint removal on your boat or yacht. This will guarantee that it is done correctly and that the materials beneath are preserved in good shape. Contact us at Masters Marine now and get a free quote with our partners at Miami Soda Blasters. Please let us know how we may assist you in any way by calling at (844) 594-0596.